How To Remove A Tree With A Chainsaw And Axe 2023

Trees are a common sight in many of our yards and neighborhoods, and while they can provide shade and beauty, tree service columbia sc is very important; there may come a time when removing them. Removing a tree can be daunting, but with the right tools and knowledge, you can easily tackle this project yourself. Discover the steps for proper tree removal using a chainsaw and axe in this article!

Tools Needed

To remove a tree with a chainsaw and axe, you will need the following tools: 

-A chainsaw

-An axe

-Chains or ropes

-A truck or other vehicle with a trailer hitch

-A friend (optional)

Tree removal columbia sc chainsaw and axe are relatively simple if you have all the necessary tools:

1. Use the chain saw to cut through the tree trunk. Ensure you wear proper safety gear, including gloves, eye protection, and ear protection.

2. Use the axe to chop through the remaining stump.

3. Attach the chains or ropes to the tree and your vehicle, and then drive away slowly until the tree is pulled out of the ground.

If you have a friend helping you, they can guide the tree as it is pulled out to prevent it from getting stuck or damaging your vehicle.

How To Cut Down a Tree Using a Chainsaw

If you want to remove a tree from your property, you’ll need to do so with a chainsaw and axe. Here’s how:

First, you’ll need to cut down the tree. To do this, start making a horizontal cut about 2/3 of the way through the tree trunk. Then, make a second cut intersecting with the first one at a 45-degree angle. Finally, make a third cut along the remaining length of the tree trunk.

Once the tree is down, you’ll need to remove the stump. To do this, use your axe to chop away the roots surrounding the stump. Once you’ve exposed the roots, use your chainsaw to cut them away.

After removing the tree and stump, you can replant or regenerate the spot where the tree once stood!

How to Use an Axe to Remove Branches

Assuming you’re already removing a tree with a chainsaw, you would use an axe to remove branches that are too large or tough to cut with the chainsaw. You will also use the axe to make a notch in the tree trunk to fall the tree in a certain direction.

First, identify which branches need to be removed. If they’re too big or tough to cut with the chainsaw, they must be chopped off with an axe. Place the axe blade on the branch at a 45-degree angle, and chop downwards with a quick, forceful motion. The goal is to make a clean cut through the branch so it can be removed easily.

If you need to make a notch in the tree trunk to fall the tree in a certain direction, then use the axe to create that notch. First, find where you want the tree to fall and mark that spot on the trunk. Then, chop out a small wedge-shaped piece of wood from that spot on the trunk using the axe. The size of your wedge will depend on how big the tree trunk is. Make sure it’s big enough so the tree will fall in your desired direction when you cut through the rest of the trunk.

Safety Precautions

-Wear proper safety gear, gloves, goggles, and a face mask.

-Clear the area around the tree of any obstacles.

-Start by cutting on the side of the tree that is facing away from you.

-Make sure the saw is sharp and oiled before beginning.

-Work slowly and carefully to avoid injury.