Connect with us

Home and Family

Why My Dyson V6 Keeps Stopping and Starting



If your dyson v6 keeps stopping and starting it could be an issue with the battery or with its power supply. There are a few things you can check and do to resolve the problem.

First, empty the dust bin. This is because the machine may perceive it to be too full, which will prevent it from working properly.

Check the battery

If you’re using a cordless vacuum with a battery and it keeps stopping and starting, your first step is to check the battery. If it’s not functioning properly, the battery will need to be replaced.

Fortunately, this doesn’t have to be a costly process. You can order a new battery from Dyson and have it shipped to your home within a couple of days.

The battery in your hdyson v6 is designed to last about three to four years of regular use, depending on how well you take care of it. To keep the battery at its best, we recommend washing the filters and brush roll every month, emptying the bin and checking all motorized attachments.

A damaged battery pack is a major cause of hdyson v6 issues and needs to be replaced as soon as possible. Damage to the battery casing can happen when you run over it, pull it too hard or your pets chew on it.

Check the filter

If your hdyson v6 keeps stopping and starting, it could be due to a problem with the filter. Dyson recommends that you clean your filter once a month to remove dirt and debris that may have collected in it.

You can do this by washing your vacuum’s filter in cold water and rinsing it thoroughly until it runs clear. After that, dry the filter well and replace it.

A faulty filter can cause your vacuum to shut off while it’s in use, which may lead to damage to the motor or battery. To check the filter, disassemble the wand from the bin and the roller head.

Make sure there is no blockage in the hose or anywhere else that can prevent airflow, like a clog on the sweeper end or tangled fibers in the roller. If you find any issues, it’s best to fix them immediately before your device starts to shut off unexpectedly.

Check the motor

If your hdyson v6 keeps stopping and starting, it may be because of the motor. Dyson’s V6 motor has 15 cyclones that spin fine dust particles and keep the filter from clogging up, meaning you don’t have to clean your filters as often.

It also has 24-air watts of power on tap in normal mode and a max setting that increases to 100 air watts, so it can handle any size room. It’s not as powerful as the Dyson Ball Animal 2 but it is plenty powerful to pick up a variety of dirt and dust particles.

The wand is easy to change too, so you can switch between different attachments and cleaning heads without having to assemble the whole thing each time. This is a huge advantage as it means you can adapt your vacuum to your needs and save on replacement costs.

Check the connection

If you have a Dyson vacuum that keeps stopping and starting, it could be because of a blockage. The vacuum is designed to deliver smooth airflow, so if something blocks that flow, it will shut off and not turn on again.

A clogged filter can cause this to happen, and you’ll need to clean it thoroughly. Washing it under running water is a good start, but you’ll also need to take the filter apart and thoroughly wipe it down to get rid of any buildup in the compartment that holds it.

You’ll also want to check the inlet, wand, and brush bar. Larger debris like cloth pieces or strings may have gotten stuck in these parts, which can prevent the vacuum from getting airflow. If it’s a simple blockage, it shouldn’t cost you much to fix, but if the vacuum doesn’t work at all, you’ll need to contact Dyson support for help. They’ll be able to give you a better idea of what the problem is and how to fix it.