Connect with us

Home Improvement

5 Reasons to Choose Tile Painting

Published

on

Gone are the days when replacing outdated, dirty, or plain-looking bathroom tile was your only choice for upgrading it. Nowadays, professional paints or tiles may get used to completely transform the appearance of your bathroom’s tile walls, floors, and other surfaces. As straightforward as it may seem, you must assess essential project factors before choosing the best painting services for your tiles. The major factors you should be aware of when choosing a paint colour are –

1. Tile Painting is Affordable

The painters in Truganina say tile painting is an affordable solution. So it should not be a surprise that it’s the most cost-effective solution to update bathroom tile that isn’t crumbling, cracking, or otherwise compromised structurally. To paint 100 square feet, DIY practitioners can spend as little as $100. For a floor covering 35 to 100 square feet, DIY retiling can cost anywhere from $100 to $1,500, depending on the type of tile used. Do you also plan to tile the walls of a 9 to 13-square-foot shower stall or the tub surround? Another $400 to $1,300 would be required. 

In these pricing ranges, solid-coloured tile made of inexpensive materials like ceramic is at the lower end, while patterned tile made of expensive materials like marble is at the higher end and may cost up to 15 times as much! On the other hand, patterns in painted tile flooring would only cost you twice as much money for supplies (depending on how many colours) and time.

2. Effortless Technique

Ceramics, porcelain (a subset of ceramic tile), natural stone (marble, travertine, slate, granite, or limestone), and quarry tile are common bathroom tile materials in various solid colours or patterns. However, such pre-made types can not match your space’s decor. You may alter the colour or design of your tile with paint to complement any decor, from a traditional checkerboard pattern to a trendy geometric pattern. After three years, you may also swiftly repaint if your tastes change. Remember that lighter paint colours are preferable for bathrooms with limited space since darker paint absorbs light and might give the impression of a smaller space.

3. Every Tile can get Painted

You may paint almost every tile, including ceramic, porcelain, natural stone, and even unglazed quarry tile, with the exception of glazed quarry tile (which doesn’t bind well with paint). However, tiled bathroom surfaces with low to moderate moisture exposure, such as bathroom floors (apart from those right next to the tub), walls, and backsplashes, will retain the colour of your paintwork the longest. Despite being paintable, tiled worktops, tub surrounds, or shower surfaces aren’t the best surfaces for this treatment over the long haul since the paint is more likely to age, peel, or blister when exposed to water frequently. However, this remedy can be the perfect solution if you are okay with doing repeated touch-ups or reapplications until your budget permits a complete redesign.

4. Right Paint can Enhance Tiles

For interior application, one-part (pre-mixed) or two-part (ready-to-mix) latex or epoxy paint can be applied to ceramic, porcelain, and unglazed quarry tile. Generally, latex paint ($10 to $30 per gallon) is less hazardous and odorous. However, unless you pick a more expensive mildew-proof kind, it ages with prolonged contact with moisture and should only be used for bathroom walls or floors. Epoxy paint ($20 to $35 per gallon) works well for the splash zones of backsplashes, countertops, tub surrounds, and shower surfaces. Unlike its latex predecessor, this type of paint dries into a resilient layer that resists moisture, heat, and general wear and tears better. Consider looking for a highly-rated two-part epoxy made expressly for tubs and tiles.

5. Low Maintenance

To maintain its colour and ward off abrasive debris, sealed painted tile has to be routinely swept, vacuumed, and mopped using a store-bought or homemade tile cleaner that’s matched to your tile. However, you may avoid scuff marks or imprints on the paintwork by placing mats in high-traffic areas and floor pads beneath furniture on the tile. Use your remaining paint and an artist’s paintbrush to make touch-ups if imperfections appear in the paintwork. Then, let it fully dry before resealing that area.

Things to Note Before Tile Painting

1. Choose the Right Paint 

When painting tiles, the first thing to consider is the paint type. Not all paints are the same, so choose one that will adhere properly and last without chipping or flaking off over time. Look for a paint specifically designed for tiles—these will usually get labelled as tile paints or tile primers—and make sure they are suitable for the surface you’re working with (e.g., ceramic, porcelain, etc.). 

2. Prepare the Surface 

Once you have the right paint, the next step is preparing the surface of your tiles. It involves cleaning them thoroughly with an appropriate cleaner and then sanding them down to ensure a smooth finish when painted. Start with medium-grade sandpaper and gradually move up to finer grades until you’ve achieved a glossy finish on your tiles. You should also ensure that any grout between the tiles is cleaned and sealed.

Connect with Expert Tile Painters: Millennium Painters

Tile painting is an easy technique to spruce up any room in your home while staying on budget! But before starting this project, ensure you consider these three tips: choose the right paint, prepare the surface properly, and then paint carefully – following these steps will help ensure that your painted tiles look great! And don’t forget – if you ever feel overwhelmed while tackling this project yourself; Millennium Painting remains just a call away from helping you right away!

Trending