Connect with us

Technology

Bulk Cat6a Plenum vs Riser Cables: Which One to Buy?

Published

on

Bulk-Cat6a

When it comes to choosing the right cable for your network, there are a lot of options to consider. Two of the most popular options are bulk Cat6a plenum cable and bulk Cat6a riser cable.

Both of these bulk Cat6a cables are designed for high-speed data transmission and reliability. But they have some key differences that make them better suited for different types of applications.

In this blog post, we’ll take a closer look at bulk Cat6a plenum vs riser cables. By the end of this article, you will be able to decide which one is the best choice for your needs. Be sure to read till the end.

Know Bulk Cat6a Cables?

Before we break down the differences between the two 1000ft cat6a cables, it is important that you know what these cables are.

To put it simply, these cables are ethernet cables standardized under the augmented category 6 of twisted pair LAN cables. Their category dictates that they support a data transfer speed of up to 10 GBit/s over 100 meters.

Additionally, these cables also support a bandwidth capacity of 750 MHz. That is more than enough for these bulk ethernet cables to handle high-performance applications. Such as PoE.

The conductor pairs of these cables are made from bare copper wires with a 23 AWG diameter. And the tight twists in the pairs mean a huge reduction in EMI and other interferences.

High-Performance Cables

In addition to the other features of these cables, it is pertinent to mention their most common use. For instance, these Bulk Cat6a Cables are used in applications where high performance is either required or mandatory.

Because these cables feature an augmented design, they are not produced with CCA conductors. This is to ensure the high quality of the products and also to ensure longevity.

Furthermore, the conductor pairs of these cables feature more twists per unit length as compared to the regular Cat6 cables. And these help in bringing down the negative effects of crosstalk.

Easy to Use

What you want with any ethernet cable is ease and convenience to use. Bulk Cat6a plenum cables are quite easy to use in that regard. That is despite the fact that the plenum-rated jacket is a thick material.

However, its design and quality manufacturing ensures that whenever you run it in indoor spaces, you will never have problems with it.

Bulk Cat6a Plenum Cable

Bulk Cat6a plenum 1000ft is designed for use in air handling spaces. Such as plenums, ducts, and other areas where the air is circulated. These cables are made from materials that are fire-resistant and emit low smoke, making them safer to use in these types of environments. They also have a higher performance rating than standard bulk Cat6a cables. Which means they can support faster data transfer speeds and longer cable runs.

One of the main advantages of bulk Cat6a plenum cable is that it is more reliable and less likely to degrade over time. This makes it a good choice for use in mission-critical applications. Such as data centers and other high-traffic network environments. However, it is pertinent to mention that they are also more expensive than the standard augmented category 6 cables. But on the flip side, the added safety and performance benefits make them well worth the investment.

Cat6a Riser Cable

Cat6a riser cable, on the other hand, is designed for use in vertical runs. For example, in between floors in a building, elevator shafts, inside walls, etc. They are not made from fire-resistant materials, but they are still suitable for use in non-plenum areas.

They also have a lower performance rating than plenum cables. Therefore, they are not recommended for use in high-speed network applications. In case they catch fire, they tend to emit toxic smoke.

One of the main advantages of Cat6a Riser Cable 1000ft is that they are less expensive than plenum cables. They are also more flexible, which makes them easier to install in tight spaces. This makes them a good choice for use in residential and small business networks, where cost and ease of installation are major considerations.

Overall, the Cat6a Riser Cable 1000ft is a good choice for indoor vertical installations. But if you are planning to buy it for horizontal runs, do not. Because it is unsafe and not recommended for indoor air-handling spaces.

Which One to Buy?

The big question boils down to this: which one should you buy? And the answer is this: Consider the specific requirements of your network when deciding which one to buy between bulk Cat6a plenum 1000ft vs Cat6a Riser Cable 1000ft.

If you are planning to run cables in air handling spaces, such as plenums, ducts, and other areas where the air is circulated, then bulk Cat6a plenum cables are the best choice. They are more reliable, safer to use, and better suited for high-speed network applications.

But if you are planning to run cables in non-plenum areas, such as between floors in a building, then bulk Cat6a riser cables are a good choice. They are less expensive and more flexible, making them a good fit for residential and small business networks.

Make the Purchase

In short, both Cat6a cables are suitable for high-speed data transmission, but they have some key differences that make them better suited for different types of applications. Bulk Cat6a plenum cables are recommended for use in air handling spaces. Whereas, the Cat6a riser cable 1000ft is best suited for non-plenum areas. Ultimately, the choice between the two will depend on the specific requirements of your network and your budget.

Trending